Skip to content
Haptique® OS

AV Receivers

AV receivers are central to media rooms and theaters. Haptique OS can use supported AVR integrations for power, input, volume, mute, and zone control.

Setup basics

Section titled “Setup basics”
  1. Put the AVR on the local network.
  2. Reserve its IP address.
  3. Add it in Haptique OS.
  4. Test power, volume, mute, and source selection.
  5. Assign it to the correct room.
  6. Add it to scenes and media controls.

Good scene examples

Section titled “Good scene examples”
  • Watch TV.
  • Movie Night.
  • Music.
  • All Off.

Troubleshooting

Section titled “Troubleshooting”

If commands are delayed or fail, confirm the AVR network control setting is enabled and that the receiver is not in a deep sleep mode that disables network access.