RS90 Remote Overview

Haptique RS90 connects to Haptique OS through your local HOS server. Config App and the RS90 must both point to the same server before pairing can work.

Use Config App from the App Store or Google Play Store to configure Haptique RS90. In local HOS setup, the app is used to select the local server, create the local user, sign in with credentials, scan the RS90 QR code, and confirm the pairing PIN.

Required order

1. Start HOS and confirm the local server IP address.
2. Open Config App on iOS or Android.
3. Change the Config App server to the HOS server IP address using the Local server option.
4. Create a new user in Config App using email and password credentials.
5. Sign in to Config App with those credentials.
6. Reset the RS90 so it shows a fresh QR code.
7. On the RS90, use Change Server and enter the same HOS server IP address.
8. Scan the RS90 QR code from Config App.
9. Enter the 4-digit PIN shown during pairing.

After the PIN is accepted, Config App and RS90 are connected through the same local HOS server.

Important sign-in notes

Google and Apple sign-in do not work for this local setup. The user is created locally on the selected HOS server, so use the credential account created in Config App.

If Config App or RS90 is still pointed at a different server, pairing will fail or the QR code will not connect through the expected local HOS server.

Continue with Pairing RS90.